There is much merchandise in the marketplace designed to protect the door against break INS but the issue isn’t just in the door. The door is only as safe as the jam is strong. I’ve had the unfortunate experience of being damaged into twice in my life.
Each times the door was intact but the jam lay shattered on the floor. It’s true that we stay in a very false sense of safety in our home. I’m going let you know how I’ve secured my jam and the jams for many of my purchasers over the years.
First you will need to perceive simply what secures your door. Your useless bolt and door latch protruding into a piece of 1x lumber and right into a 2×4. The useless bolt has a plate that gets screwed into the 2×4. That plate is the extent of the safety on your door. The door latch holds nothing. There isn’t any security with the door latch.
So that is the straightforward method I’ve secured doors. First remove the molding on the latch facet of the door. It starts with a 1 inch to 1.5 inch piece of angle iron about three to four feet long. This is the toughest a part of the job.
To make it look good it’s essential to then notch the 1x on the door facet face and on the front edge to fit the angle flush into the wood. Now mark for the door latch and the dead bolt and drill out the holes. Next drill the holes for the screws that may hold the angle in place and counter sink them so the screws are flush. You should definitely put a screw on both sides of the dead bolt and door latch and put screws down the face and the front so it is held from both directions.
As soon as all screw holes are accomplished, set up the iron utilizing four inch deck screws. You will have to pre drill for screws this long. Once the screws are in place now you can re installs the door molding. Drill via the steel for your nails should you need to.
Next, utilizing self drilling screws set up your latch plates. What makes this work is the general size of the steel. An intruder could break the wood at the latches but to kick the entire iron out is nearly impossible. Remember at all times attempt to have an excellent alarm system to protect towards break INS.