A technology using a radio wave that is implemented into a remote garage has grown rapidly. With this wireless technology you can open the garage door from the distance of some hundreds feet.
You can ensure that no person who is no unauthorized person enter into your garage with reprogramming your remotes and keyless entry or you can reset it when you just bought a house using a garage door opener like this. I will use the LiftMaster garage door opener at this case. You can easily reset the pre existing settings by following these simple steps.
1. The first step is setting up ladder.
2. Search on your remote “Learn” button. Press the button for several seconds until the LED light goes out.
3. Next hold the “learn” button for thirty seconds or release it until you see LED lights blink on the motor unit.
4. If your garage door to respond when you pressing the button on your remote. Congratulations you’re done.
How to Reset Your LiftMaster Keyless Entry
1. Enter your current PIN and then hold the # key until the LED blinked twice and release the # key. At that time you will be given orders to enter your new PIN. When finished input new PIN press enter. An indication that your PIN has been changed is to look at the LED light blinked once.
2. The classic problems are commonly experienced by some people is you forget your PIN. How to reset your PIN is by pressing the “Learn” in the motor unit, then enter your new PIN and press enter. LED will blink once indicating that you have changed your PIN.
3. Test with input your new PIN and press enter. When the door to move then you’ve succeeded.
You can also change the wireless code as long as you have access to the motor unit within 2-4 seconds by using your remote.
1. Press and hold the “Learn” button. This button near the lamp lens behind your garage motor unit. Don’t forget to bring your remote.
2. When you press the “Learn” button wait for the LED light to start flashing. After that on your remote, press and hold the Open button for 30 seconds.
3. Hold down the button for twenty seconds until the main motor flashes and then release the button.
4. Finally you wait for thirty seconds until the LED light stop flashing.
